Advantages of PP Hollow Plastic Formwork:
Formworks expend large labor force and total cost of the project that is why efforts have made to introducing a formwork system that is cost effective and can be assembled, dismantled and handled easily by labor.
PP hollow plastic formwork is an energy-saving and environmentally friendly product. It is a new generation product after wood formwork, combined steel formwork, bamboo-wood glued formwork, and all-steel large formwork. It can completely replace the traditional steel formwork, wooden formwork and square wood, which is energy saving and environmentally friendly. The amortization cost can be lowered with the formwork.
The turnover of pp hollow plastic formwork can reach more than 30 times, and it can also be recycled. The formwork features the properties of wide temperature adaptability range, strong specification adaptability. It can be sawed and drilled. Moreover, it's easy to use. The flatness and smoothness of the formwork surface exceed the technical requirements of the existing fair-faced concrete formwork. It can meet the requirements of various cuboid, cube, L-shaped and U-shaped building forms.
There are several advantages provided by PP Hollow Plastic Formwork in concrete construction:
1. Cost effective
2. Labor friendly
3. Eco friendly
4. Low maintenance
5. Versatil
PP Hollow Plastic Formwork:
Size: 1220*2440mm / 915*1830mm
Thickness: 12 / 15 /18 mm
Color: Grey white & Grey black.
Materials: Polypropylene （PP）
Features and characteristics of PP Hollow Formwork:
1. The hollow building formwork has good machinability and is basically consistent with the wood formwork construction method.
2. Hollow building formwork is non-hygroscopic, corrosion-resistant, acid and alkali resistant, especially suitable for use in humid environments.
3. Hollow building formwork has high strength, impact resistance, wear resistance, long service life, and turnover times up to 40 times.
4. Hollow building formwork surface is smooth and there is no need to apply mold release agent. It can be sawed, stapled, used together with wood formwork. Used scrap boards and scraps can be recycled and reused, saving cost and reducing pollution.
PP Hollow Formwork Method of Using:
1. The method of use is the same as that of the wooden formwork. The direction of the vertical ribs of the hollow building formwork forms a cross shape with the direction of the wood.
2. No need to apply mold release agent before use.
3. When the cast-in-place plate is used, the distance between the keels is 20~25cm, and the distance between the keels of the plate wall is 15~20cm.
4. The joint between the board and the board needs to be sealed with tape.
5. The length of the nail should not be too long, generally about 30 ~ 35mm.
6. Nail strength should be moderate.
7. When removing the mold, it is necessary to carry out the small piece from one end, and remove the template while dismantling the support to prevent large areas from falling, and do not let the corners fall perpendicularly to the ground.
8. The template can be mixed with wood plywood, bamboo glue board and other material plates.
Hot Tags: PP Hollow Plastic Formwork, China, manufacturers, suppliers, wholesale
