According to the characteristics of the products and the requirements of customers, Plastic Divider Separator Boards can be combined with many materials to design. There are five kinds of packaging materials commonly used: PE bag, EPE, EVA, dust-proof curtain and flannel fabric.
What packaging materials can Plastic Divider Separator Boards be combined with?
1. PE bags are mainly used when placing PE plastic card bags on both sides of the hollow board turnover box.
2. EPE, also known as pearl cotton, EVA and hollow board can form a variety of backplane, gaskets and inner packaging materials.
3. EVA, EVA and hollow board can also form various backplanes, gaskets and inner packaging materials.
4. Dust-proof curtain, mostly used for the cover of hollow board turnover box.
5. Flannel cloth and hollow board are combined to make knife clips for use, also known as coated knife clips.
Accessaries concerned with Plastic Divider Separator Boards:
1. Ultrasound welding joint. Ultrasound welding point is an important way to connect the box body. It connects the box body by means of ultrasonic welding. It has the advantages of high speed, low cost and high durability.
2. Nail type. Including rivets, round head tapping screw, flat head tapping screw, self tapping drill tail screw, pulling rivet, plastic rivet, plastic screw and so on, according to customer needs from the main choice.
3. Magic stickers. Including back glue magic sticker and non-back glue magic sticker, mainly used in the sealing of the hollow plate lid, can open and close freely.
4. Card bags, clips, folders. Including back-type clip, hard card bag, L-type clip, size folder, etc., can be installed on both sides of the hollow crate insert tags for easy identification and classification.
5. Corner protection. Including strengthening angle protection, movable angle protection, large bottom angle, flat roof angle protection, aluminum angle protection, aluminum triangle bar, etc., mainly used to increase the firmness of the box.
6. Bottom angle. Including black bottom angle, aluminium bottom angle, anti-static large flat bottom angle, lace bottom angle, etc., mainly used for the bottom of the four corners of the box, can reduce the wear of the bottom of the box, beautiful and durable.
7. Edge category. Including PP edge, PVC edge, anti-static edge, aluminum alloy edge, etc., to strengthen the reinforcement, increase the stability of the box.
8. Handclasps. Including external clasp, internal clasp, solid clasp, joint clasp, etc., commonly used for white and black, easy to move box device products.
Specification of Plastic Divider Separator Boards:
Size: 50*50*40cm , 300*300*150mm
Thickness: 3mm/4mm/5mm
THC | 3mm | 4mm | 5mm |
GSM | 600-700g/m² | 750-850g/m² | 1200-1200g/m² |
Production of Plastic Divider Separator Boards:
Maintaince of Plastic Divider Separator Boards:
1. Never expose the hollow panel to the sun or rain for a long time, which will directly shorten its service life. The heat resistance of the hollow board is very poor. Long-term exposure or soaking will make the hollow board aging too fast and affect the use effect.
2. Under normal circumstances, hollow plate products can not be thrown directly from high places. Avoid the damage and crack of the hollow plate turnover box caused by the violent impact, except for the case of the test of special products which are reinforced and aggravated.
3. The load-bearing situation of hollow plates with different thickness will be different, so it is not suitable to place objects beyond the load-bearing range for extrusion or stacking. This will cause deformation or damage of the hollow plate. If there is a high bearing requirement, the use of thicker boxes can be considered.
4.Don't use too much force when handling or unloading. Forklift trucks should not hit the pallet vigorously. If the pallet is damaged, hollow boards and cargo will be affected. In addition, when handling cargo, avoid dragging or throwing hollow boxes on the ground.
5. Hollow panel can be cleaned and maintained regularly. The hollow board can be scrubbed and cleaned with milk, rice washing water or clean water, so that its service life will be longer.
Packing & Shipping of Plastic Divider Separator Boards:
Packing details: PE bags or PE film wrapped, packed onto pallet.
Port: Qingdao, Tianjin, Shnghai, Ningbo port
Capacity: 5000 PCS/Day.
Hot Tags: plastic divider separator boards, China, manufacturers, suppliers, wholesale
