Cleaning is mainly in the general production area, clean area, container cleaning room. When cleaning, will use cleaning containers, latex gloves, rags, and brushes. The order of cleaning is from inside to outside, from top to bottom As well as the first corner and then the plane, the following describes how to clean and disinfect the hollow board turnover box:
(1) Send the hollow board turnover box to be cleaned into the clean room of the container, and then dip the rag with detergent to clean the handle, corners and bottom of the hollow board box, etc., to be clean, without stains.
(2) Dip the rag onto the cleaning agent, and clean the flat parts in order from inside to outside and from top to bottom.
(3) Wash the hollow board turnover box three times with water, immerse the turnover box in water, about 3 cm, then wipe it clean with a rag, and finally put it in the clean room of the container for natural drying.
(4) Generally, disinfection is carried out by wiping method, using disinfectant.
(5) After the disinfection, put it in a clean room of containers and containers, let it dry naturally, and fill in the date and validity of cleaning and disinfection
