single use Plastic Pallet

Genaral Description:

Injection molding is one of the most popular processes of shaping plastics to a desired pallet shape and size. It is suitable for large scale production, especially where the same design of plastic pallet should be molded several times.

Generally, injection molding process involves the following key processes:

Raw material is fed into the machines through a hopper (depending on the type of plastic pallet, you can use PP or HDPE material).

Heater bands and frictional force melts the plastic material

Hot plastic (in liquid state) leaves the heating chamber through a nozzle to a cavity (shape of the pallet you need), where it cools and hardens.

In injection molding plastic pallet manufacturing process, you can choose from:

Low pressure structural foam molding

High pressure injection molding

So, what’s the difference between these two types of injection molding?

Low Pressure Structural Foam Molding

Here, the molding cavity is injected with plastic pallet material and an inert gas. That is, a gas that does not react chemically with the material.

You can use either carbon dioxide or nitrogen.

Heating a mixture of nitrogen gas and polypropylene activates blowing agents. This produces a cellular core surrounded with a rigid plastic material.

Different Manufacturing Process of Plastic Pallet:

Injection molding plastic pallets

Thermoforming plastic pallets

Blow molding plastic pallets

Compression molding plastic pallets

Rotational molding plastic pallets

Why choose us?

1. Over 10 year's in design, production and marketing

2. R&D center, 2 factories, 10+ strategic partner factory, 20+ new products every year

3. products exported to more than 60 countries 90% products exported. mainly to Australia, European,

North American.

Compare between used materials and virgin materisla:

Specification:

Size: 1200*1000*150mm
Materials: Virgin and recycled materials.

Production:

In thermoforming plastic pallets, a plastic sheet is heated to a pliable temperature after which, it is molded to the tools shape. Here, you’ll use suction for vacuum forming or suction and pressure.

On the other hand, in injection molding, you’ll heat the plastic to a liquid state then inject it into a mold.

Packing & Shipping:

Hot Tags: single use Plastic Pallet, China, manufacturers, suppliers, wholesale