Amorphous, odorless, non-toxic, highly transparent, colorless

Blister board is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic with excellent physical and mechanical properties, especially excellent impact resistance, tensile strength, flexural strength, compressive strength. High; small creep, dimensional stability; good heat resistance and low temperature resistance, stable mechanical properties, dimensional stability, electrical properties and flame retardancy over a wide temperature range, available at -60~ Long-term use at 120 ° C; no obvious melting point, molten state at 220-230 ° C; due to the large molecular chain rigidity, resin melt viscosity; small water absorption, small shrinkage, high dimensional accuracy, good dimensional stability, film breathable Small; self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil, acid, alkali, oxidizing acid and amine, ketone, soluble in chlorinated hydrocarbons and aromatics Solvents, which are prone to hydrolysis and cracking in water for a long time, are disadvantageous in that they are prone to stress cracking due to poor fatigue strength, poor solvent resistance, and poor wear resistance. The blister door panel is a very mature and very popular cabinet material in Europe. It is divided into two types: matt molded plate and high-gloss molded plate, which can be processed into various shapes. There are domestic and imported parts of the face mold, the difference is the thickness and thinness of the face mold, and wear resistance. The high-gloss molded door panel is the latest material to truly replace the painted door panel.