A plastic pallet (pallet) is a logistics unit used in conjunction with logistics equipment such as forklifts and shelves. It can be used to store, load and transport goods. It is one of the essential logistics equipment in modern logistics and warehousing. The appearance of plastic pallets is to meet the needs of environmental protection. The use of plastic pallets instead of wooden pallets can reduce the best products for forest damage; it is an inevitable product to adapt to the development of logistics industry. With the continuous strengthening of food safety concept, the high hygiene requirements of the pharmaceutical industry Plastic pallets are favored and sought after by the food and pharmaceutical industries for their anti-corrosion, anti-moisture, anti-corrosion, anti-insect, and non-mold. In addition, plastic pallets have a wide range of applications in the chemical, textile, and manufacturing industries due to their high load carrying capacity and long service life.
1. The size is 110cm long and 110cm wide. The flat plate is used on both sides, four-way insert, 1.5 tons of dynamic load, 5 tons of static load, and the color is orange. The raw material is pure low-pressure high-density polyethylene (HDPE) raw material (no irritating odor, non-toxic and harmless gas emission). The materials used must be corrosion-resistant, no regenerative materials should be added, and steel pipes should not be used for reinforcement. The warranty period is 3 years, and the damage caused by quality problems during the warranty period will be replaced free of charge according to the ratio of 1 damaged pallet to 1 new pallet. If the warranty period is exceeded or the damage is caused by the operation problem, replace it with 3 damaged pallets for 1 new pallet. Replace the freight manufacturer to bear. If it does not meet the requirements, Yisheng Petrochemical has the right to request a return.
2. The pallet technical standard refers to the requirements of the national standard GB/T15234-94.
3. Pallet acceptance requirements meet the GB2934-82 intermodal flat tray size series.
4. Tray use temperature range: The tray is normally used in the temperature range of -40 ° C to +60 ° C.
5. Appearance: The surface of the pallet should be flat without cracks and cracks and deformations that are not affected. There should be no obvious color difference on the single tray, and the color of the same batch of products is consistent.
