Wall Formwork molding:
1. Combined small steel formwork is used for formwork panel, and the main type of small steel formwork is 600mm wide and the thickness of plate is 2.75mm. Prepare the dosage of two sections.
1. Combined small steel formwork is used for formwork panel, and the main type of small steel formwork is 600mm wide and the thickness of plate is 2.75mm. Prepare the dosage of two sections. 2. The vertical external keel adopts double steel pipe 48mm × 3.2mm with a spacing of 700mm; the outermost horizontal keel adopts double steel pipe 48mm × 3.2mm with a spacing of 300, 450, 300 and 450
3. Arrange 12 split bolts with horizontal spacing in the section.
Column formwork matching:
The formwork is made of 15mm thick multilayer plywood. Vertical keel 50 × 100mm batten. The small transverse keel is 50 × 100mm, and the spacing is 300mm. The wooden frame is wrapped. Φ 48 steel pipe is used for transverse (column hoop) with a spacing of 400mm, and Φ 48 × 3.5 steel pipe is used for support
Beam formwork matching:
Bottom formwork: beam section width b = 350mm, beam section height h = 650mm, timber section used for beam formwork 50 × 100mm
