1. The method of use is the same as that of the wooden formwork. The direction of the vertical ribs of the hollow plastic formwork and the direction of the wood form a cross.
2. No need to apply mold release agent before use.
3. For cast-in-place slabs, the keel spacing is 20~25cm, and the keel spacing for the slab wall is 15~20cm.
4. The splicing seams between the boards need to be sealed with tape.
5. The length of the nail should not be too long, generally around 30~35mm.
6. The strength of nailing should be moderate.
7. When removing the formwork, it needs to be carried out from a small piece at one end. Remove the formwork while removing the support to prevent large areas from falling. Do not let the corners fall vertically against the ground.
8. The template can be mixed with wood plywood, bamboo plywood and other material boards.
