PP Hollow ConstructionTemplate

Introduction:

PP Hollow ConstructionTemplate is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. Plastic formwork is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. Hollow plastic formwork is energy saving and environmental protection,and can completely replace the traditional steel formwork, wood formwork, square wood, What's more, its amortization cost is very low.

Advantages compared to traditional film faced plywood:

1) It is anti worm/water/corrosion and has all good characteristics which wood does not hold.

2) It can be reused at least 60 times

3) It has no glue emission and its finish is very smooth

4) It is easy to cut, nail and screw on it

5) It is very light and easy to carry and can relieve workers from heavy labor consuming

Making Process:

The key process in producing molds formwork panels is to make sure the formwork flat and tidy, easy stripping, can keep stable weatherability,and not easy to change shape.

Raw Materials Preparation --Extrusion--Moulding--First Cut--Pulling--Second Cut--Fine Pruning--Sealing the edge--Product Packaging

Installation Steps:

1.Use the Wall Template Panel intersecting surface laid with 15mm thick.

2.Wood square of the distance: (1) on the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.15 m floor (spacing is 200 ~ 250 mm.(2) the shear wall (spacing according to adjust the spacing, height and thickness of the wall to wall height of 2800 mm, 300 mm thick wall). For example, using the formwork (15 mm thickness spacing is 100 ~ 150 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.

3.Die shear wall and column puzzle when leaving no gaps, internal Angle (the bottom of the wall) parts must have wood square, beam, wall, formwork connection. Shear wall made 4 after the mold must be assembled into the whole hoisting, then lay flat, reduce labor intensity, forming effect is good.

Using and Application:

PP Hollow Wall Formwork Template Panel can be used in Construction Engineering, Bridge Tunnel Engineering, Water Conservancy and Hydropower Engineering, Mine Dykes and Underground Engineering, Pipeline Turnover, etc.

1. High-rise Building and Construction Engineering

The Template Formwork is a kind of temporary structure, which is made according to the design requirements, so that the concrete structure and components are shaped according to the prescribed position and geometrical dimensions, maintain their correct positions, and bear the weight of the building formwork and the loads acting on it. The purpose of carrying out the formwork project is to ensure the quality of concrete works and construction safety, speed up construction progress and reduce project costs. Wall Formwork Template Panel.

2. Bridge Tunnel Engineering &Water Conservancy and Hydropower Engineering

PP Wall Template Panel has light weight, high strength, good hardness, impact resistance, and wear resistance properties, the surface is flat and smooth; the pouring molding effect is good. As it is no water absorption, no deformation, and no mildew, after long-term soaking in water, it is not layered, no foaming, and the sheet size is stable. It is especially suitable for water conservancy projects.

PP Hollow ConstructionTemplate Specification:

Packing and Shipping:

1. Pallet packing.

2. Bulk packing.

3. Pallet and bulk mixed packing.
   

Delivery:

Delivery time: 10-30 days since receipt of PO and down payment.

Freight:Sea transportation (FCL & LCL)

Special size: We provide cutting services for special sizes

Hot Tags: PP Hollow ConstructionTemplate, China, manufacturers, suppliers, wholesale