Acrylic board has low strength and poor heat dissipation capacity. This material can resist sharp scratches, but usually these scratches can be repaired. Because the Mohs hardness of the hardened pressure panel is generally 3-4 hours (the nail is about 2-3 hours; the copper coin is about 3.5 ~ 4 yuan, and the knife is about 5.5 ~ 6), the hardness of the knife can only be drawn on the surface without leaving it. trace. The acrylic panel is prone to scratches after some wipes. So how to deal with the phenomenon of acrylic scratches? The following editor will introduce you.
1. Before using clean water, clean the acrylic surface. Find scratches.
2. Use a special super soft cloth with a little cream, a gentle force to repeatedly wipe the acrylic on the surface with slight scratches, you can repeat the cream and wipe it several times in 1 minute, and then wipe with a clean special cloth. .
3. If the surface is still a little unsatisfactory at this time, you can wipe the polishing paste with a finer crystal dew and wipe again, which will have obvious results.
4. If the scratches on the surface are too deep, it is recommended to use a waterproof sandpaper of more than 1200 mesh to clean it before use.
