Both the casting board and the extruded board are one of the materials of Yakezhidao products, and their materials can be other colors (white, black, red, apple green, etc. are used more). Their transparency is very good, comparable to crystal.
difference:
1. The casting board has a transparency of more than 98%, while the extruded board has only 92%.
2. There is no pitting on the edge of the casting board, and the edge is very transparent; and there will be pitting on the edge of the extruded board, and the edge of the grade B board of the extruded board can be seen yellow and black, and the edge of the grade A board of the extruded board It will be more dark
3. The tolerance of the pouring plate is increased with the increase of the required thickness (see what is the tolerance of acrylic sheet), and the tolerance of the extruded plate can be controlled within ± 0.1mm
4. The casting board will choose 1.83M * 1.22M and 2.44M * 1.22M, and the length and width of the casting board can be arbitrarily selected (but not too wide, it will cause deformation and increase the tolerance)
