Description

Technical Parameters

The important thing to say three times
We are a factory
We are a plastic concrete formwork supplier
We are a professional manufacturer of construction formwork

plastic formwork factory

i beam manufacturer

Product Name:	H20 Plastic Beam for Formwork Systems
Raw Material:	PVC
Specification:	50x90mm, length can be customized
Weight:	1.7kg/m
Product Performance:	light weight, high strength, waterproof and Resistant, No absorption of moisture, no deformation, no mildew
Reuse time:	More than 150 reusable times
Application:	All building support systems
Easy to operate:	Sawing, drilling and nailing are all available.
Operation Instruction:	When nailing, the distance from H beam edge should be 15-30mm, the strength should be moderate, 40-50mm of the length of nails is better.
Bear temperature	-35℃~120℃

H20 Beam Advantages:

1. Light weight,high strength,high turnover,waterproof and corrosion resistant.

2. Surface is smooth,bright and clean; Casting molding effect is good.

3. No absorption of moisture,no deformation,no mildew,long-term immersion stratification in the water.

4. Easy to process. Sawing,drilling and nailing are all available.

5. Easy to remove. Removing is convenient,quick and safe.

6.Long service life can be recycle used for 100-150 times.

7.Open storage.

plastic h20 beam is in Production

Comparision with other materials:

Performance comparison	plastic H beam	Common Wood	Common square steel	Common steel pipe
Drop Test (10m)	Not broken	Broken	Deformed	Deformed
Wear-resistance	Good	Poor	Good	Good
After water absorption	no absorption no deformation	Deformed	Rusty and deformed	Rusty and deformed
Nail	Easy	Easy	Unworkable	Unworkable
Expansion shrinkage	Small	Smaller	Smallest	Smallest
Residual value of scrap	High	non	Low	Low
Periodic maintenance	No need	No need	Need	Need
Reusable times	150 times	20-30 times	80-100 times	80-100 times