PP hollow building formwork has many uses in architecture, so what are its advantages?
1. Easy to install and disassemble
It is simple and fast to connect with buckle; the surface of formwork is smooth and clean, automatic demoulding, no cleaning and maintenance, no demoulding agent, no cement is stuck on the surface of formwork after use, and the formwork does not need cleaning; under the same workload, the construction efficiency can be increased by 40% compared with steel formwork; compared with bamboo formwork, the construction efficiency can be increased by 40%.
PP hollow building formwork
2. Easy to assemble and disassemble
For the same building area, the time consumption of hollow building formwork is about 40% less than that of traditional formwork. The thermal expansion coefficient of the hollow energy-saving building formwork is far from that of the concrete. After pouring, the formwork will automatically separate from the poured concrete with the change of temperature. It can be easily removed without knocking, and the operation time will be greatly saved.
3. Convenient and safe handling
The density of hollow building formwork is 0.4g/cm3, which is only 1 / 21 of the steel. It is light. A worker can easily hold a 900mm × 1800mm formwork with both hands, which is very convenient for handling. The formwork will not deform and absorb water during use, which can greatly improve the construction safety, and its damage rate is less than 1 ‰.
4. Stable and excellent performance
Polypropylene resin as the base material, making more environmental protection. Polypropylene resin (PP particles) is a kind of crystalline polymer with regular structure. It is a kind of thermoplastic resin with light milky white particles, tasteless, nontoxic and light weight. It has good mechanical properties, heat resistance, chemical stability, acid, alkali resistance and organic solvent resistance. -Under the condition of temperature from 10 ℃ to 75 ℃, no shrinkage, no wet expansion, no cracking, no deformation and stable size.
5. Green environmental protection
The hollow plastic board is made of modern chemical HDPE and HDPP materials, which is light (hollow structure) and non-toxic. It can be recycled for more than 50 times by replacing wood with plastics, steel with plastics, and bamboo with plastics. It can be recycled without harmful waste, toxic gas and environmental damage.
6. Strong plasticity
It can be sawed, planed, drilled, nailed, with accessories to form any geometry at will, to meet the needs of various shapes of building component formwork. Because the hollow plastic template adopts a special molding process, any color can be achieved through the color masterbatch, and the surface is smooth and easy to print.
To learn more about PP hollow building template, please pay attention to us!
